List of domestic publications in 2019

[1] NM Tuyen and NN Hoang, “Determining the calculated length of columns in multi-story steel frames according to TCVN 5575:2012 and EN 1993-1-1,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 5V SE-Scientific article, Nov. 2019, doi: 10.31814/stce.nuce2019-13(5V)-08.

[2] PTN Thu and PQ Tuan, “The influence of protective wrapping on stress and strain of I-section steel beams under high temperature conditions”, Journal of Construction Science and Technology - University of Construction , vol. 13, no. 5V SE-Scientific article, Nov. 2019, doi: 10.31814/stce.nuce2019-13(5V)-06.

[3] HN Duc, VA Tuan, and TM Dung, “Longitudinal shear resistance of concrete pins in small height hollow composite beams through push test”, Journal of Construction Science and Technology - University of Construction , vol. 13, no. 5V SE-Scientific article, Nov. 2019, doi: 10.31814/stce.nuce2019-13(5V)-01.

[4] VS Tung, PN Thang, and NN Linh, “Simulation of a double box-shaped thin-walled steel bar component subjected to axial compression”, Journal of Construction Science and Technology - University of Construction , vol. 13, no. 5V SE-Scientific article, Nov. 2019, doi: 10.31814/stce.nuce2019-13(5V)-09.

[5] NT Ha, “Design of welded composite I-section steel beams according to TCVN 5575:2012 and SP 16.13330.2017,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 5V SE-Scientific article, Nov. 2019, doi: 10.31814/stce.nuce2019-13(5V)-05.

[6] D. V. Thuat, N. D. Hoa, HV Chuong, and TD Khanh, “Single-story industrial steel frame with crane designed to withstand earthquake and wind loads”, Journal of Construction Science and Technology - University of Construction , vol. 13, no. 5V SE-Scientific article, Nov. 2019, doi: 10.31814/stce.nuce2019-13(5V)-02.

[7] NT Kien, NT Hieu, and HT Nghia, “Research on the applicability of open steel frame dam solutions to prevent mudslides in the mountainous areas of Northern Vietnam,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 5V SE-Scientific article, Nov. 2019, doi: 10.31814/stce.nuce2019-13(5V)-04.

[8] NT Hieu, VA Tuan, and NQ Cuong, “Optimization of the weight of solid column steel frame truss using differential evolution algorithm,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 5V SE-Scientific article, Nov. 2019, doi: 10.31814/stce.nuce2019-13(5V)-07.

[9] NH Anh, Tran Hoai; Tan, Nguyen Ngoc; Giang, “Experimental study of the load-bearing capacity of reinforced concrete beams corroded in chloride corrosive environment”, Construction Journal, Ministry of Construction , 2019.

[10] PQ Linh, Nguyen Ngoc; Tan, Nguyen Ngoc; Quang, Nguyen Van; Minh, “Theoretical and experimental study to determine the limiting bending moment of reinforced concrete beams according to the nonlinear deformation model of concrete”, Vietnam Journal of Science and Technology , 2019.

[11] NH Anh, Tran Hoai; Tan, Nguyen Ngoc; Giang, “Some characteristics of concrete cracks on reinforced concrete beams corroded in chloride corrosive environment”, Construction Journal, Ministry of Construction , 2019.

[12] LT Lu, Nguyen Kim; Hieu, Nguyen Trung; Cuong, “Comparative study of some equivalent cross bracing models applied to the analysis of reinforced concrete frames with infill masonry,” Construction Journal, Ministry of Construction , 2019.

[13] NN Tan, “The influence of steel fiber content on the flexural tensile strength of steel fiber concrete” , Construction Journal, Ministry of Construction , 2019.

[14] NV Quang and NN Tan, “Theoretical and experimental study of some methods for predicting crack formation moment of reinforced concrete beams”, Journal of Construction Science and Technology - University of Construction , vol. 13, no. 2V SE-Scientific article, May 2019, doi: 10.31814/stce.nuce2019-13(2V)-03.

[15] NN Tan, “Influence of steel fiber content on axial tensile characteristics of steel fiber concrete” , Construction Journal, Ministry of Construction , 2019.

[16] N. D. Nguyen and NN Tan, “Prediction of the remaining load-bearing capacity of reinforced concrete columns subjected to eccentric flat compression with longitudinal reinforcement corroded” , Journal of Construction Science and Technology - University of Construction , vol. 13, no. 2V SE-Scientific article, May 2019, doi: 10.31814/stce.nuce2019-13(2V)-06.

[17] N. Linh, Nguyen Ngoc; Tan, Nguyen Ngoc; Hieu, “Experimental study of the behavior of multi-span composite floor slabs under static load” , Construction Journal, Ministry of Construction , 2019.

[18] NN Hung, Nguyen Manh; Linh, “A method of representing stress relaxation in concrete through creep coefficient and aging coefficient in concrete” , Construction Journal, Ministry of Construction , 2019.

[19] NN Linh, Nguyen Ngoc; Tan, “Experimental comparison of the performance and load-bearing capacity of single-span and multi-span steel-concrete composite floor structures under static load”, Vietnam Journal of Science and Technology , 2019.

[20] NN Lanh, Le Phuoc; Linh, “Influence of loading method in reinforced concrete beam load testing”, Construction Journal, Ministry of Construction , 2019.

[21] L. D. Hoa, Le Thai; Tan, Nghiem Ha; Tien, “Introduction to a design and construction process of monolithic reinforced concrete transfer beams in Vietnam,” Young Scientists Conference of Hanoi University of Civil Engineering , 2019.

[22] CV Hung et al. , “Application of ultra-high performance concrete (UHPC) formwork for the construction of reinforced concrete bridge decks”, Journal of Construction Science and Technology - University of Civil Engineering , vol. 13, no. 2V SE-Scientific article, May 2019, doi: 10.31814/stce.nuce2019-13(2V)-01.

[23] NK Tan, Nghiem Ha; Tuan, “A method to determine the emission rate of construction waste from demolition works,” Young Scientists Conference of Hanoi University of Civil Engineering , 2019.

[24] LT Tu, Tran Minh; Long, Nguyen Van; Huynh, Le Xuan; Hai, “Static analysis of porous material plates placed on a Pasternak elastic base with different boundary conditions”, Proceedings of the National Conference on Engineering Mechanics commemorating the 40th anniversary of the establishment of the Institute of Mechanics, Hanoi, April 9, 2019 , 2019.

[25] Deputy Chairman, Nguyen Van Binh, “Digitizing unstructured data for engineering calculations in the context of climate change, using an improved Monte-Carlo method”, National Conference on Engineering Mechanics - Commemorating 40 years of establishment of the Institute of Mechanics, Hanoi , 2019.

[26] TM Duc, Do Minh; Tu, “Analysis of natural vibrations of sandwich beams with FGM surface layer by meshless method according to different beam models”, National Conference on Engineering Mechanics - Commemorating 40 years of establishment of the Institute of Mechanics, Hanoi , 2019.

[27] TM Long, Nguyen Van; Tu, “Exact solution of Timoshenko FGM beam with hollow microbubbles subjected to bending placed on an elastic foundation when considering the position of the neutral surface”, National Conference on Engineering Mechanics - Commemorating 40 years of establishment of the Institute of Mechanics, Hanoi , 2019.

[28] VV Tham, TH Quoc, and TM Tu, “Analysis of the natural vibration of a composite plate structure reinforced with carbon nanotubes and attached piezoelectric material layer” , Journal of Construction Science and Technology - University of Construction , vol. 13, no. 3V SE-Scientific article, Jul. 2019, doi: 10.31814/stce.nuce2019-13(3V)-05.

[29] T. D. Hung, Dang Xuan; Tu, Tran Minh; Hao, “Static analysis of single-layer carbon nanotube reinforced composite plates under different boundary conditions”, National Conference on Engineering Mechanics - Commemorating 40 years of establishment of the Institute of Mechanics, Hanoi , 2019.

[30] NH Cuong, HN Khoa, and BD Dai, “Effective self-compacting concrete curing techniques under Vietnamese climate conditions,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 5V SE-Scientific article, Nov. 2019, doi: 10.31814/stce.nuce2019-13(5V)-15.

[31] HN Cuong, Nguyen Hung; Linh, Tran Hoai; Khoa, “Application of neural networks to predict work performance parameters of self-compacting concrete mix at concrete mixing plants”, 5th International Conference - Exhibition on Control and Automation VCCA-2019, 2019.

[32] LQ Hoa, Le Thai; Duc, Nguyen Anh; Trung, “Research on the application of Artificial Neural Networks (ANN) to assess the risks of BOT transportation projects”, Journal of Transportation , 2019.

[33] VA Hoa, Le Thai; Ha, Le Hong; Tuan, “Research on the application of RBF artificial neural network to predict and classify BOT transport projects based on cost overruns during the construction phase” , Construction Journal, Ministry of Construction , 2019.

[34] LV Thuc, LQ Trung, and NM Hung, “Study on controlling thermal cracking in mass concrete by using cooling tube mechanism,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 3V SE-Scientific article, Jul. 2019, doi: 10.31814/stce.nuce2019-13(3V)-11.

[35] DT Duc, Ngo Trong; Lien, Tran Van; Hung, “Determining cracks in continuous FGM beams using artificial intelligence network combined with wavelet analysis of dynamic displacements”, Proceedings of the National Conference on Engineering Mechanics commemorating the 40th anniversary of the establishment of the Institute of Mechanics, Hanoi, April 9, 2019 , 2019.

[36] VV Phuong, Phan Thi Thu; Cuong, Nguyen Tien; Huyen, Tran Thi Thanh; Truong, “Study of some characteristics of 2D particle flow under the influence of gravity,” 22nd National Conference on Fluid Mechanics , 2019.

[37] TM Truong, Huong Quy; Hung, Dang Xuan; Tu, “Static analysis of sandwich beams with surface layer of FGM material and core of porous material with different boundary conditions by Ritz method”, National Scientific Conference, commemorating 40 years of establishment of the Institute of Mechanics , 2019.

[38] D. C. Nam, Nguyen Sy; Khang, Nguyen Van; Dat, “Stable control and inverse dynamics of a single-link elastic robot arm”, Proceedings of the first national scientific conference, Da Nang , 2019.

[39] TV Tam, PT Tung, NT Ninh, and PN Vuong, “Developing software to calculate the load-bearing capacity of eccentrically compressed reinforced concrete elements of any cross-section according to TCVN 5574:2018,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 4V SE-Scientific article, Sep. 2019, doi: 10.31814/stce.nuce2019-13(4V)-05.

[40] D. V. Tung, “Survey and evaluation of the method for calculating the long-term crack width of reinforced concrete beams according to TCVN 5574:2012 and Russian standard SP 63.13330.2012,” Construction Journal, Ministry of Construction , 2019.

[41] NM Hung, NT Phong, and NT Hieu, “Building an experimental model to determine the stress relaxation of concrete in reinforced concrete beam structures,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 4V SE-Scientific article, Sep. 2019, doi: 10.31814/stce.nuce2019-13(4V)-01.

[42] NT Thang and NT Trung, “Survey of the reduction in fire flexural resistance of reinforced concrete beams according to European standards”, Journal of Construction Science and Technology - University of Construction , vol. 13, no. 4V SE-Scientific article, Sep. 2019, doi: 10.31814/stce.nuce2019-13(4V)-03.

[43] VN Tam, HK Son, S. Amol, and NT Thang, “Calculation of load bearing capacity for drilling and anchoring bolts into concrete according to European standards,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 4V SE-Scientific article, Sep. 2019, doi: 10.31814/stce.nuce2019-13(4V)-10.

[44] VM Tung, “Structural calculation model of transfer beams in high-rise building design”, Journal of Construction Science and Technology - University of Construction , vol. 13, no. 4V SE-Scientific article, Sep. 2019, doi: 10.31814/stce.nuce2019-13(4V)-02.

[45] NM Thu and PT Tung, “Calculation of reinforced concrete flat walls with door openings according to the bracing model (STM),” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 4V SE-Scientific article, Sep. 2019, doi: 10.31814/stce.nuce2019-13(4V)-04.

[46] PM Tuan, “Bending moment resistance of steel and GFRP composite reinforced concrete beams according to TCVN 5574:2018,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 4V SE-Scientific article, Sep. 2019, doi: 10.31814/stce.nuce2019-13(4V)-07.

[47] VQ Viet, TV Hung, and PT Hoan, “Study of the bending capacity of double-layered concrete-filled steel tubes with joint connections by finite element simulation,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 4V SE-Scientific article, Sep. 2019, doi: 10.31814/stce.nuce2019-13(4V)-11.

[48] NC Thang, NH Phong, NV Tuan, PH Tung, and LN Lan, “The influence of recycled lightweight aggregate particles from construction demolition waste on some mechanical properties of lightweight concrete,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 4V SE-Scientific article, Sep. 2019, doi: 10.31814/stce.nuce2019-13(4V)-09.

[49] N. D. Nguyen and DV Hai, “Prediction of force-displacement curve of a single-span reinforced concrete beam subjected to four-point bending with corroded reinforcement”, Journal of Construction Science and Technology - University of Construction , vol. 13, no. 4V SE-Scientific article, Sep. 2019, doi: 10.31814/stce.nuce2019-13(4V)-08.

[50] N. Thang, “Calculation of stirrups for reinforced concrete beams subjected to both uniformly distributed and concentrated forces simultaneously” , Journal of Construction Science and Technology - University of Construction , vol. 13, no. 1V SE-Scientific article, Mar. 2019, doi: 10.31814/stce.nuce2019-13(1V)-03.

[51] TH Nguyen and TC Ly, “Experimental study on the effectiveness of strengthening cracked concrete beams with carbon fiber reinforced polymer (CFRP) sheet material,” Edition B of Vietnam Journal of Science and Technology , vol. 61, no. 3 SE-, Mar. 2019, [Online]. Available: https://b.vjst.vn/index.php/ban_b/article/view/338.

[52] TV Tam, “The influence of pre-compression stress in concrete on the punching resistance of flat slabs” , Construction Journal, Ministry of Construction , 2019.

[53] NT Trung, DV Hai, and PM Phuong, “Assessment of fire resistance of reinforced concrete slabs by simple methods according to EN 1992-1-2 standard,” Journal of Construction Science and Technology - University of Construction , vol. 13, no. 2V, pp. 41–52, May 2019, doi: 10.31814/stce.nuce2019-13(2V)-05.